Products
 NeedaSample® |
|
Inventory
Search
|
Custom Sensing Solutions
You may think of Optek as a sensor component company. We are more than just that. With our ISO and QS 9000 certified manufacturing facility located in Juarez, Mexico; and our engineering team in Carrollton, Texas; we've been providing fully assembled and tested optoelectronic assemblies to our customers for more than 30 years. We can be on your shop floor within days to learn about your assembly. We will then provide a preliminary proposal within forty-eight hours and can be in production within a month on certain opportunities.
Board Assembly & Associated
Electronic Components
Automated PC Board assembly including Surface Mount, Thru Hole, with Two Sided device mounting Wave Solder with Automated Cleaning
In circuit test capabilities
 |
|
 |
|
| |
|||
|
|
|
|
|
|
|||
|
|
|
|
| |
|||
|
|
|
|
| Custom Hand Assembly | |||
| Auto Die & Wire Bonding | |||
| Auto Pick & Place | |||
| Wave Solder Processing | |||
| |
|||
|
|
|
|
||
|
|
|
|
|
|
|||
|
|
|
|
|
|
|||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
OPTEK is committed to leveraging the combination of our technological resources & manufacturing expertise with innnovative ideas to provide value added solutions to our customers. Below are a few examples of how we helped others.
|
|
|
|
|
 |
This medical customer began by purchasing off-the-shelf components from an authorized distributor for approximately $1.00 a pair (consisting of a transmitter and receiver) In order to increase performance of the finished assembly, the customer asked Optek to provide specially selected parts. To reduce cost by consolidating the supply chain, the customer asked Optek to manufacture the whole assembly including the optical components, PCB, connectors and wiring harness with the legacy design. Optek further reduced the cost while increasing reliability by suggesting changes in the design of the assembly. |
 |
|
|
|
 |
This banking equipment customer began by purchasing a standard OPB855 for approximately $1.00. In order to optimize their sensor assembly, they transitioned to a specially selected configuration, while continuing to use their own contract assembler. Optek continued to add value by soldering the sensor, PCB and connector and eliminated a step in the supply chain. |
|
|
|
|
 |
This industrial customer began by purchasing discrete components from Optek but were using a contract manufacturer for assembly. As is often the case, the customer migrated to specially selected transmitter and receivers, while still using the contract manufacturer for final assembly. In order to solve alignment problems with the assembly, Optek redesigned the plastic housing and began producing the complete assembly. Optek further enhanced the design with custom wires and connectors. |
|
|
We're convinced we can be your value added partner!
Contact our Applications Engineering Team at:
(972) 323-2200 x2200
or
(800) 341-4747 x2200
Shortcuts |
 |
 |